Multizone Digital mixers with signal processing to make the integration simple.
Digiline series is composed of two digital mixers with signal processing, specially designed for small/medium size installations that require a powerful solution for audio processing. Their intuitive use make them very convenient for speeding up installations. The main features for the series are:
Digital matrix mixer of 8 double inputs and 8 outputs, independent digital processing for each output,TCP/IP device control managing all the Digiline units from the same computer,8 x 150 W class D power amplifier with switching mode power supply (only for Digiline 8).
Digiline series brings the power of digital mixing to small multizone installations integrating independent DSP processing for each output. Thanks to the new software WorkCAD Designer, it is possible to control any Digiline units included in an Ethernet network from a unique computer.
Their GPIO (General Purpose Input/Output) interface allows to trigger any function (configured through software) from a simple wall-mount switch. Users can configure the independent signal processing of each channel with parameters like Crossover, Equalizer and Dynamics. Digiline MX and Digiline 8 are adequate for fixed installations like business offices, restaurants, small shopping centres, etc.
8 channels but 16 inputs.
Each input is a double one: 1 Line + 1 Mic for Phantom powered microphone. Both inputs are balanced and summed in a same channel, providing 16 inputs possibilities distributed in 8 input channels.
Digital signal processing on each output.
The engine system of Digiline MX and 8 includes a complete independent digital signal processing on each output, featuring Crossover, Equalizer and Dynamics. They are remotely configurable using WorkCAD Designer.
GPIO triggering (easy remote control).
In addition to traditional inputs, 12 GPIo inputs (4 GPIo in the Digiline 8) with TTL level (DC 0-5 V) are available to launch preset from a simple controller. Users can program several actions on the Digiline. For example, it is possible to set up alarm parameters (e.g. select one Micro as warning) and launch this preset with a signal. Thanks to the monitoring system, Digiline detects if contacts are closed or opened (these inputs can be used for output configurations with Digiline MX).
Optimum control through Ethernet.
Thanks to the advanced TCP/IP control system, these powerful networked units can be remotely controlled from the same computer and at the same time. It is possible to use an Ethernet controller for all the parameters of Digiline units but it also admits ASCII orders by TCP/IP being able to be managed by third party controllers.
Programmable Mic input.
An additional Mic input detects the acoustic level of the installation. Users can set up actions to be launched depending on acoustic level. For example, it is possible to set up an action which increases volume output when acoustic level is exceeded.
Digital matrix mixer of 8 x 8 (each input is composed of 2 inputs: 1 Mic and 1 Line).
Independent processing of signal for each output.
Controllable through TCP/IP protocol, in order to control from a unique computer all the units connected to an Ethernet network.
Third party controllers can be connected to control Digiline by TCP/IP and RS232 (RS232 only available in Digiline MX) thanks to the command reader incorporated by its firmware.
All MIC inputs are phantom powered.
Powerful software WorkCAD Designer for Digiline connexion through TCP/IP.
GPI triggering mode to launch actions, presets, etc from a simple controller.
Only for Digiline 8: Built-in power amplifier (8 x 150 W RMS).
Matrix mixer: 8 mixers of 8 channels with reverse signal and mute for any channel.
Crossover: Butterworth type fi lters, Linkwitz-Riley and Bessel up to 4° order with up to 7 fi lters per output.
Equalizer: Equalizations with peak type curves, low pass, high pass, notch, low shelving, high shelving and band pass with up to 7 filter per output maximum.
Dynamic control: Common Limiter compressor for fi rst 7 channels and an independent one for the last one.
Output channel volume control: Selectable by software and frontal potentiometer (36 dB to -109 dB range). 48 bit processing architecture with 76 bits of precision for most audio processing features.
Presets memory: 10 program memories available.
DSP Architecture: 32 bit processing with 40 bits of precision.
Oversampling: 8 x Oversampling with fi fth order noise shaping @ 32-48 kHz; 4 x Oversampling @ 88.2 and 96 kHz; 2 x Oversampling @ 176.2 kHz and 192 kHz.
Digital De-emphasis: For 32,44.1 and 48 kHz.